ST1-M2 Key Features
Applications
Customer Reviews
Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Just installed the Step-Sliders for my 2-door Bronco Wildtrak. These things look and feel like they should hold up to some punishment offroad. They also allow my wife and I to get into the Bronco easier without having to slide across the seats.
Drivers side slider was a little difficult to install due to some tolerance issues with the pinch weld. I believe this was an issue with the pinch weld from the factory. Had to drill out the rear mounting hole just a tad but once I did that the sliders slid into place without issue. Looking forward to getting these out on the trail.
Let customers speak for us
Great bumper
It’s a great looking bumper with a great price. Install was super easy except for the parking sensors. I couldn’t line it up correctly and ended up just turning off my rear parking sensors. With the camera, it’s not like I truly need it. I’m sure if I had a dremel and wasn’t lazy I could’ve made the sensors line up correctly.
Jose
2021+ Ford Bronco Baja Tubular Rear Bumper
Great rock sliders
Love the fit and toughness. EZ install and well built. Nice packing job as well, no issues here.
Joshua M.
2021+ Ford Bronco Rock Sliders 2-Door
Great roof rack
The roof rack was simple to put together, however installing it took a min to get the rack centered. Once the rack was centered it was a breeze. I love the half rack but may end up buying the full one, the front section of the roof seem like it is missing something due to being a half rack.
Jhon C.
2021+ Ford Bronco 2 Door Hard Top Half Roof Rack
Nice bull bar - pay attention on install
This is for the OEM modular bumper Baja bull bar. I temporarily installed this at first in a somewhat haphazard way screwing in the original long torx head bolts, but not the smaller supplied bolts, because I wasn’t sure if the supplied washers were stainless. A couple of the bolts had a hard time going in because the bull bar didn’t quite align with the holes. I wasn’t happy at this point. But after buying metric stainless washers and painting them black I reinstalled the bumper. This time I started with all the four shorter supplied bolts and once they were started, I did the rest of the bolts, leaving the two front face bolts for last. This fit much better and now I am fully happy with the bar. I am also happy with the design, and also it’s one of the most reasonably priced bars like this I could find. The quality of the welds and the paint is very good too. There was a tiny spot that I had to touch up with some black paint, but nothing meaningful. The one suggested change I would make to the company Is that where the bar attaches to the front face of the bumper, use a larger piece of metal on each side so that the bar can screw into four holes on the front face of the bumper, not just two holes as it’s designed presently. This would make for a stronger attachment.
Mark H.
2021+ Ford Bronco OEM Modular Bumper Baja Bull Bar
Amazing
The upper control arm is not only gorgeous to look at. It has created an even better driving experience the quality it adds to bumpier trails has me never questioning the decision I made with purchasing them over all the other options.
Jefferie D.
2021+ Ford Bronco Billet Upper Control Arms - Pair
Ford should have offered this from the factory
I changed from the soft top to the Turn Hardtop. night and day difference! the fit and finish is exceptional and I have gotten several compliments on it since installation. Thanks Turn!!!
Philip G.
2021+ Ford Bronco Hard Top (4 Door)
Does this interfere with the field of vision for the front camera?
Does this interfere with the field of vision for the camera?
Kev
2021+ Ford Bronco OEM Modular Bumper Baja Bull Bar
Great product!
Install took about 2 hours by myself. They are heavy so a jack and jack stands are recommended. I used hand tools so it would have probably gone faster with impacts, but some of the bolts are in tight locations. I had to drill out the front 2 pinch weld holes as they did not line up all the way, but that was no big deal. The top plates were also installed backwards on mine, but 5 minutes later and all was well. Fit and finish is fantastic. Packaging was great, each part was wrapped individually in a rubbery type material, then wrapped in plastic and sprayed with foam to fill out the box. FedEx label said 149.8 pounds and delivery guy about had a Hernia carrying it to my door. Overall very satisfied customer. They look great and work even better.
Mike T.
2021+ Ford Bronco 4-Door Step & Rock Slider
Great product, solid packaging
I received this within 24 hours of ordering it, which is just flat out amazing even though I'm fairly close by Turn HQ. The solution was well packaged, and the Youtube based instructions were pretty easy for me to follow. I was able to install this by myself with relative easy in about 90 minutes. I hardly had to make any adjustments and now my tailgate is clearly strong enough to support more weight on top of the spare.
Thomas M.
2021+ Ford Bronco HD Tire Carrier Tailgate Reinforcement
Great hard top!
Nice looking hard top! So much better than the OEM!
Eric O.
2021+ Ford Bronco Hard Top (4 Door)
Universal Offroad Spare Tire Storage Rack - Offroad Ice Chest Carrier
Alfred P.
Universal Offroad Spare Tire Storage Rack - Offroad Ice Chest Carrier
Perfect fit, great quality, and as usual, impeccable customer service. Completes my hardtop! All set for winter driving!
Joseph K.
TR10 Bronco Hard Top Rear Window, Defroster & Wiper Assembly