Our tire carrier features an adjustable design that allows for aftermarket wheels with offsets ranging from +40mm to -40mm to sit tight against the tailgate, providing a surface for the spare tire to mate against, an improved look, and additional clearance.
After deciding to go with a 37” tire on a 22x12 wheel, Even though it states it’s for +40 to -40, I went with a -44 offset and it fits perfect, adds a lot of character to overall esthetic and fairly simple to install. I have the reinforcement kit along with the spare tire carrier, looks super clean. Thanks
2021+ Ford Bronco Adjustable Tire Carrier & Camera Mount
Installed the TC3-M1 HD Tire Carrier Tailgate Reinforcement a couple of months ago with the factory tire carrier and was very impressed with the load compacity. Just upgraded to 37" tires with aftermarket rims so needed to get rid of the OEM carrier. The Turn Adjustable Tire Carrier was very easy to install & is very adjustable. Camera view is clear and does not show any part of the tire. I think i will need to carry a ladder to access my storage box on the tire shelf :)
The tire carrier is the third item I’ve purchased from Turn Offroad, and I’m very impressed with their products. This tire carrier has significantly reduced the rattling from my aftermarket spare tire.
Very easy to install. I love the adjustability. This gives me because I have a -12 offset rim now with this installed my camera view is clear and does not show part of my rim.
If you have after market wheels and tires on your Bronco this full adjustable spare tire carrier is a must have adjustable height and depth allows any/ most tire combos to fit like factory again
This was a very easy install. The best thing I like about it is I can adjust the placement of the tire and camera so that now my -12 rim and tire sets nice and tight against the tailgate support and the camera is back to factory view
I previously had a 4WP aftermarket tire carrier, and the tire was bouncing all over the place when hitting bumps (the tire doesn't sit against the bump stops with that aftermarket carrier). It was loud, and was dangerous.
I found this tire carrier, and it's perfect. It sits really close to the sheet metal so it looks nice, and because it's adjustable it allows the tire use the factory bump stops for additional stability.
Last, I had a couple of issues with the original kit that was delivered. My 2022 Base Bronco didn't have the correct camera plug to use the extension wire included in the kit, and for some reason the kit's 3rd brake light extension arms didn't provide enough space for the windshield wiper on the hard top. However, their support team was AWESOME. They immediately sent out a kit to deal with the camera, and we talked through how to get the extension arms to work until we got it figured out. They were even sending pictures from their workshop showing me what to do. In the end , it all got worked out and I love the tire carrier. It looks much better, and is MUCH safer than the 4WP tire carrier.
The adjustable tire carrier with camera mount is a game-changer. It's well-made and enhances my Bronco's look.
The adjustable tire carrier with camera mount is versatile. It gives my Bronco added utility and looks great.
Pre-order item
Soft armchair
$420.00
Select variant
Select purchase option
Spare tire is rock solid now. Very impressed with both form and function.
The light and harnesses are super well made im happy with the purchase the only bad thing I can say is the instructions aren't the greatest but it wasnt hard to install either way
When problems arose the support team jumped all over it and resolved the issue above and beyond what I expected. Very happy with the product as well.
First, the shipping packaging was excellent. Really showed a commitment to quality, and that was further exemplified in the build quality of the Chase Light itself. The idea is quite clever and the lights are surprisingly bright. The only issues are the yellow lights are not very yellow when illuminated. The lenses are yellow but the light overpowers them and when on, the yellow looks white. I remedied that with some yellow light tinting film. The second issue is that I would like for the chase light to sit lower, closer to the tire. Unfortunately, while it is technically adjustable, if you lower the light in the bracket below the highest setting it interferes with the rear wiper. I think using some form of spacers between the light and the bracket to push it outward" about an inch should work, but I have not tried it yet. All in all, it is a good product and it works as advertised, and it appears extremely well built. It has some minor issues users should be aware of but it is a great addition to marketplace for Bronco owners.
First off I gave it 4 stars for two reasons: First is no instructions and when it said online for them I expected a PDF or something not a video that does a half @ss job of showing the install. It can be figured out without any help from video or instructions but it significantly adds time to the install. There is really only one right way for parts to fit. The short L-track bar goes on the bottom. I put the long one first and had to take it off which adds time and brings me to the 2nd reason for 4 stars. Everything looks and feels high quality EXCEPT the screws for the L-track system. These screws are not anodized black, they are silver screws very shoddily painted black. The paint is so thick on some of them that the Allen wrench cannot seat completely making it hard to get them tightened and harder to remove. Also as soon as you get the Allen wrench in the paint flakes off revealing the silver underneath.
Now that the bad is over with onto the good. This was very well packaged and nothing was damaged upon arrival. It looks good and not including the vehicle prep took about an hour to install due to having to figure it out myself. It can be put on with one person although a bit tricky. Just make sure the back cap is loose by lifting it from the inside then you can reach in from the outside via the passenger door area and lift it high enough to get the bottom mount in place. once you set that side of the cap down it locks it in so you can get back inside to make sure the bolt holes are lined up. Repeat for other side. I have a 25' Outer banks with the black painted top so I can confirm this fits with the painted top. For the top mount to get it lined up properly and fit in the seam above the window and between the roof you might have to give it a little love tap with the heel of your hand.
I will be putting a full length Attica Terra series rack on with this because unfortunately I cannot remove the front panels with the matching Turn off road full rack and the half rack (more like 1/3rd rack) is too short to fit my needs.
Very pleased with my experience. When product/installation related issues arose, their support team went above and beyond to take care of everything. Very happy with my purchase!!
Ive reached out to TO via email. The right side of the cargo area closest to the swing gate is not the same as what is shown and provided. Im hoping engineering/design can create an updated version for the 25 model. Other than that the product would be a 5 star. Recommend installing when/where its warm for ease of adherence
Love that there are 10 LED modes available via simple dip switch change. Install took me all of 5-10 minutes.
I added a couple of quick disconnects to make it easier to access the switches if need be.
Overall I’m happy with the light. It looks good and is super bright. I cut up the plug and play harness to wire it how I wanted to so I won’t get into that. You cannot use your rear wiper if you’re using the stock tire carrier and the yellow lights aren’t very yellow. Also, I ordered the flash module which came with no instructions. I’m assuming it goes inside the light housing. So close to being great. Needs printed instructions.
