Can anyone show me hoe bad it covers the front camera up
G
Gary M.
A little rough
The driver side angle weld was tighter than the passenger side weld and I was unable to get the 13mm bolt into the hole with the supplied flat washer. Scratched the heck out of it until I gave up and used a smaller washer I had laying around. Of course it wasn't black so it's noticeable...
A
Adam H.
.
C
Charlie H.
Quality Product, Looks Great
I have had the complete experience with the folks at Turn. The first one I received the wings were not level so it didn’t fit. However the customer support folks are awesome and took care of shipping a replacement quickly. The replacement one fit great! The material, craftsmanship and appearance are excellent. The video is a must watch for installation.
The only thing I would add for Raptor owners, there is a rubber gasket between the bumper and the grill, and the center flanges will come in contact with it. A little creative trimming with a small razor at the contact points, and it fit with no issues. That is the only additional step for a Raptor bumper versus the others.
I love the look, and I am pleased with the purchase and customer service of Turn Off-Road. If you are thinking about getting one, don’t hesitate.
D
David i.T.
Great product and STELLAR customer service.
I recently ordered a Turn Offroad Baja Bar for my 2025 Bronco with modular bumper. The bar arrived quickly but unfortunately suffered from a manufacturing defect. The Turn Offroad crew were super quick to send a replacement to me, which was perfect and also arrived quickly. Stuff happens but the true test of a company is how they stand behind their customer and Turn Offroad handled the situation perfectly. I am a very satisfied customer!
C
Charles
Not a easy install on a Bronco raptor. You have to remove parts from the front end to get this bar on. There is no clearance on some bolts.
n
nick w.
Almost perfect 9 out of 10
So it really looks amazing .. my only issue was the two bolts that are they supplied are so low profile it chipped the power coat away in that area only on the one side.. bummer truck has 534 miles in it and was trying to have it look mint and and oem feelin with this baja bar .. acouple thousandths or so it wouldn't of been an issue
D
David S.
Great product super easy to install. Thanks.
W
W A.
Very close to a perfect fit
Easy install, used the factory nuts where I could and the supplied ones in the tight spots. I Like the look a lot, not to big and compliments my Bronco well.
R
ROBERT C.
OEM MODULAR BUMPER BAJA BULL BAR
Fantastic add on to my OEM Modular front bumper. Looks great! Excellent quality and price. Easy install. 10/10 rating.
At first we were unsure about buying an aftermarket hardtop, but after doing enough research on factory vs aftermarket. We obviously decided on this one and so far so good we are very pleased with the quality. Definitely easy to install! Also the way they shipped and packaged it was great! Todd helped with any questions I had and was actually able to speak with him on the phone. Great company and definitely will be buying more products from them!
Very good build quality. Everything was boxed and shipped very well. All the holes lined up and I only had to adjust the front brackets. Very quiet and you can not compare it to a soft top. This made me love my bronco.
After driving 1 year with the soft top, I am in love with this hard top. So much quieter, better gas mileage, and over all just great. The guys at the shop were amazing at installing it. I couldn't be happier!
This seems to be a excellent top no wind noise and no leaks. Installation job was fast good job, drove 15 hours home that day and it was much quieter then the trip down. Thank you
Really love this hard top, it looks great and has made a huge difference in noise level vs the soft top. It no longer sounds like semi trucks are riding in my backseat. It was fairly easy to install but it would be nice to have the instructions included in the package vs having to refer back to the installation video. I did have some issues with the front driver side bolt lining up during install but was able to maneuver the top to get it fastened down although it did cause a good amount of frustration. Everything else lined up well but that one area was off by about half an inch. I hope that it does not cause additional problems when I remove and reinstall in the summer. It was difficult to find a way to force the top over to align while trying to align and tighten the bolt down. Nonetheless, I am very satisfied with the hard top and the customer service from Turn Off-road.
I changed from the soft top to the Turn Hardtop. night and day difference! the fit and finish is exceptional and I have gotten several compliments on it since installation. Thanks Turn!!!
Looking for that Baja-inspired style for your 2021+ Bronco? Look no further than the Turn Offroad Modular Bumper Baja Bar (Part # EA3-M1).
This easy-to-install bolt-on bumper adds both protection and serious style to your ride, making it perfect for those who want to hit the desert with confidence and look good doing it.
Featuring a Baja-inspired design, this bumper is built tough to take on the toughest conditions the desert can throw at it. It comes with all the necessary hardware for an easy bolt-on installation, so you'll be back out on the trail in no time. Pair it with the Turn Offroad Modular Bumper Winch Plate (Part # EAW-M1) for the ultimate off-road setup.
Pairs great with Turn Offroad Modular Bumper Winch Plate (Part # EAW-M1)
Fits all 2021+ Broncos with OEM Modular Bumper
Applications
2021+ Ford Bronco 2 and 4-Door Models (*Visible on forward-facing camera but not visible 360-degree view.)
Detailed Description
Designed to fit all 2021+ Broncos with OEM Modular Bumper, this Baja Bar is sure to turn heads wherever you go. And while it may be visible on the forward-facing camera, it won't interfere with your 360-degree view, so you can still keep an eye on everything around you.
Upgrade your Bronco with the Turn Offroad Modular Bumper Baja Bar today and get ready to hit the desert in style!
Detailed Description
Designed to fit all 2021+ Broncos with OEM Modular Bumper, this Baja Bar is sure to turn heads wherever you go. And while it may be visible on the forward-facing camera, it won't interfere with your 360-degree view, so you can still keep an eye on everything around you.
Upgrade your Bronco with the Turn Offroad Modular Bumper Baja Bar today and get ready to hit the desert in style!
Looking for that Baja-inspired style for your 2021+ Bronco? Look no further than the Turn Offroad Modular Bumper Baja Bar (Part # EA3-M1).This easy-to-install bolt-on bumper adds both protection and serious style to your ride, making it perfect for those who want to hit the desert with confidence and look good doing it.Featuring a Baja-inspired design, this bumper is built tough to take on the toughest conditions the desert can throw at it. It comes with all the necessary hardware for an easy bolt-on installation, so you'll be back out on the trail in no time. Pair it with the Turn Offroad Modular Bumper Winch Plate (Part # EAW-M1) for the ultimate off-road setup.
Can anyone show me hoe bad it covers the front camera up
G
Gary M.
A little rough
The driver side angle weld was tighter than the passenger side weld and I was unable to get the 13mm bolt into the hole with the supplied flat washer. Scratched the heck out of it until I gave up and used a smaller washer I had laying around. Of course it wasn't black so it's noticeable...
A
Adam H.
.
C
Charlie H.
Quality Product, Looks Great
I have had the complete experience with the folks at Turn. The first one I received the wings were not level so it didn’t fit. However the customer support folks are awesome and took care of shipping a replacement quickly. The replacement one fit great! The material, craftsmanship and appearance are excellent. The video is a must watch for installation.
The only thing I would add for Raptor owners, there is a rubber gasket between the bumper and the grill, and the center flanges will come in contact with it. A little creative trimming with a small razor at the contact points, and it fit with no issues. That is the only additional step for a Raptor bumper versus the others.
I love the look, and I am pleased with the purchase and customer service of Turn Off-Road. If you are thinking about getting one, don’t hesitate.
D
David i.T.
Great product and STELLAR customer service.
I recently ordered a Turn Offroad Baja Bar for my 2025 Bronco with modular bumper. The bar arrived quickly but unfortunately suffered from a manufacturing defect. The Turn Offroad crew were super quick to send a replacement to me, which was perfect and also arrived quickly. Stuff happens but the true test of a company is how they stand behind their customer and Turn Offroad handled the situation perfectly. I am a very satisfied customer!
C
Charles
Not a easy install on a Bronco raptor. You have to remove parts from the front end to get this bar on. There is no clearance on some bolts.
n
nick w.
Almost perfect 9 out of 10
So it really looks amazing .. my only issue was the two bolts that are they supplied are so low profile it chipped the power coat away in that area only on the one side.. bummer truck has 534 miles in it and was trying to have it look mint and and oem feelin with this baja bar .. acouple thousandths or so it wouldn't of been an issue
D
David S.
Great product super easy to install. Thanks.
W
W A.
Very close to a perfect fit
Easy install, used the factory nuts where I could and the supplied ones in the tight spots. I Like the look a lot, not to big and compliments my Bronco well.
R
ROBERT C.
OEM MODULAR BUMPER BAJA BULL BAR
Fantastic add on to my OEM Modular front bumper. Looks great! Excellent quality and price. Easy install. 10/10 rating.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Select a purchase option to pre order this product
Countdown header Countdown message
DAYS
:
HRS
:
MINS
:
SECS
Pre-order item
Soft armchair
$420.00
Select variant
Select purchase option
Your pre-order item has reached its limit.
PlanB G.
Spot on product
I looked at other methods of limiting my tailgate. For the price, I chose these turn offroad limiters. They came with super glue, I opted to put a little dab of E-6000 in each hole to give a little added adhesion. They work flawlessly.
2021+ Ford Bronco Tailgate Limiter Rubber Stop
MC
Key FOB
Protects well. No issues with range
Turn Offroad Bronco Key FOB Cover
HB
Great Fitting hard top
Super fast shipping for such a large item. Unfortunately the shipping company wrecked the first one. Recommend the shipping insurance. With it the process was so simple and the team and customer service was second to none. Very Please with the results and the way I was taken care of. The top looks great also. Highly recommend
2021+ Ford Bronco Hard Top (4 Door)
Chris T.
Love it!
Nice rack! Easy to install with the video and I did it myself with no help. I did add the end piece and struts after the main assembly was on the roof. It’s nice and aligned and snug. When you rock it, the Bronco rocks. I was careful not over tighten the roof clips and it’s perfect. Love the squared look and finish!
2021+ Ford Bronco 2 Door Hard Top Half Roof Rack
CarlZ
Best MOLLE panels for the soft top
Turn makes most of my favorite stuff for the Bronco and these MOLLE panels are sweet!
2021+ Ford Bronco Swing-Out Tire Carrier with Lights MIKE T.
Love it!!!
Love the quality. Super easy install! Only thing is that….. I wish you all made a ready set go for Broncos with body lifts. With research I was able to easily “modify” so it works with one but it would’ve been easier had you guys done the research for me. LMFAO!!!!
I really like the design with the exception of the hardware, and what I mean by that is that the spacers are made of very thin wall tubing making it hard to center each one up and there seems to be some hardware missing, 4 screws, lock washers, and flange nuts to mount to molle to side bracket. also missing your LOGO. (sadly, Made in China)
Upon arrival I was impressed with the thought that went into securing the hardtop for shipping. They’ve even added a couple more anchor points to help than what’s shown in their unpacking video. The crate was wrapped with plastic and tore a little when it arrived ( I was expecting cardboard protection like in the unpacking video) but the top was in great condition minus the cover for the window wiper motor that had fallen off but was still in the crate fortunately.
I looked at other methods of limiting my tailgate. For the price, I chose these turn offroad limiters. They came with super glue, I opted to put a little dab of E-6000 in each hole to give a little added adhesion. They work flawlessly.
This is my 5th-6th purchase from Turn. I am far from a Karen but will call cheap shit out in a heart beat. Their product is quality, no amazon cheap china import crap. OH, and Don’t get me started on their customer support… Yup, 5 stars as well… Thanks Todd
Next... I need to save my paper route tips for a new suspension. Haha
