Always a fan of the quality and careful thought that goes into TO products. Only mounting one light on the outside for now and it looks very clean and moves light completely out of site on drivers side.
I had to make two minor adjustment. Holes in mounts did not fit my KC Pro Era 3 mounting bolt. Nothing a quick drill couldn't fix. Outside stock screws are too short with neoprene gasket and washers. So I picked up a couple longer screws. Still giving the team a 5 stars for quality and look. Would be nice to include longer screws and make sure the milling of the mounts fits all the major brands of lights.
Gonna look for something to put on the outside and move my ProEra 3's to the inside.
Thanks again, and GODSPEED.
PS - ordered a pack of 22mm round rubber plugs on Amazon to make the bolt countersinks weatherproof. This should help keep the bolts from weathering.
C
Chase W.
Added Visibility with Mirror Light Mount
The mirror light mount is functional and stylish. It improves visibility and adds character to my Bronco.
J
Jerry W.
Mirror Light Mount Looks Great
Installed the mirror light mount and it's a great accessory. It adds visibility and enhances my Bronco's look.
C
Connor M.
Love the New Mirror Light Mount
The mirror light mount is a fantastic upgrade. It's a small touch that has a big impact on my Bronco's appearance.
Let customers speak for us
from 318 reviews
Great bumper
It’s a great looking bumper with a great price. Install was super easy except for the parking sensors. I couldn’t line it up correctly and ended up just turning off my rear parking sensors. With the camera, it’s not like I truly need it. I’m sure if I had a dremel and wasn’t lazy I could’ve made the sensors line up correctly.
The roof rack was simple to put together, however installing it took a min to get the rack centered. Once the rack was centered it was a breeze. I love the half rack but may end up buying the full one, the front section of the roof seem like it is missing something due to being a half rack.
This is for the OEM modular bumper Baja bull bar. I temporarily installed this at first in a somewhat haphazard way screwing in the original long torx head bolts, but not the smaller supplied bolts, because I wasn’t sure if the supplied washers were stainless. A couple of the bolts had a hard time going in because the bull bar didn’t quite align with the holes. I wasn’t happy at this point. But after buying metric stainless washers and painting them black I reinstalled the bumper. This time I started with all the four shorter supplied bolts and once they were started, I did the rest of the bolts, leaving the two front face bolts for last. This fit much better and now I am fully happy with the bar. I am also happy with the design, and also it’s one of the most reasonably priced bars like this I could find. The quality of the welds and the paint is very good too. There was a tiny spot that I had to touch up with some black paint, but nothing meaningful. The one suggested change I would make to the company Is that where the bar attaches to the front face of the bumper, use a larger piece of metal on each side so that the bar can screw into four holes on the front face of the bumper, not just two holes as it’s designed presently. This would make for a stronger attachment.
The upper control arm is not only gorgeous to look at. It has created an even better driving experience the quality it adds to bumpier trails has me never questioning the decision I made with purchasing them over all the other options.
I changed from the soft top to the Turn Hardtop. night and day difference! the fit and finish is exceptional and I have gotten several compliments on it since installation. Thanks Turn!!!
Install took about 2 hours by myself. They are heavy so a jack and jack stands are recommended. I used hand tools so it would have probably gone faster with impacts, but some of the bolts are in tight locations. I had to drill out the front 2 pinch weld holes as they did not line up all the way, but that was no big deal. The top plates were also installed backwards on mine, but 5 minutes later and all was well. Fit and finish is fantastic. Packaging was great, each part was wrapped individually in a rubbery type material, then wrapped in plastic and sprayed with foam to fill out the box. FedEx label said 149.8 pounds and delivery guy about had a Hernia carrying it to my door. Overall very satisfied customer. They look great and work even better.
I received this within 24 hours of ordering it, which is just flat out amazing even though I'm fairly close by Turn HQ. The solution was well packaged, and the Youtube based instructions were pretty easy for me to follow. I was able to install this by myself with relative easy in about 90 minutes. I hardly had to make any adjustments and now my tailgate is clearly strong enough to support more weight on top of the spare.
Turn Offroad’s Billet Mirror Light Mount allows you to customize how you mount lights to the A-pillar of your Bronco.
Design and R&D were focused on improving aesthetics and versatility when mounting varying light combinations. The kit allows you to mount lights to the base mount, the two wings, or any combination in between.
This means no matter what your light setup, your vehicle will have a robust and well-thought-out mounting solution that looks like it was custom-built for your vehicle.
Always a fan of the quality and careful thought that goes into TO products. Only mounting one light on the outside for now and it looks very clean and moves light completely out of site on drivers side.
I had to make two minor adjustment. Holes in mounts did not fit my KC Pro Era 3 mounting bolt. Nothing a quick drill couldn't fix. Outside stock screws are too short with neoprene gasket and washers. So I picked up a couple longer screws. Still giving the team a 5 stars for quality and look. Would be nice to include longer screws and make sure the milling of the mounts fits all the major brands of lights.
Gonna look for something to put on the outside and move my ProEra 3's to the inside.
Thanks again, and GODSPEED.
PS - ordered a pack of 22mm round rubber plugs on Amazon to make the bolt countersinks weatherproof. This should help keep the bolts from weathering.
C
Chase W.
Added Visibility with Mirror Light Mount
The mirror light mount is functional and stylish. It improves visibility and adds character to my Bronco.
J
Jerry W.
Mirror Light Mount Looks Great
Installed the mirror light mount and it's a great accessory. It adds visibility and enhances my Bronco's look.
C
Connor M.
Love the New Mirror Light Mount
The mirror light mount is a fantastic upgrade. It's a small touch that has a big impact on my Bronco's appearance.