Overall, it’s well built but could use some design and QC tweaks.
There are elastic strap holes without straps, limiting flexibility and utility.
The panel in the door was installed inverted (the larger, horizontal strap is on top, supposed to be on bottom, and it should have been design with two, parallel, large, horizontal, elastic straps to hold a flask more securely) but the 4 panel-mounting holes are not symmetrical, the panel can’t be corrected without drilling new holes.
Velcro straps would have been a better option.
Thin padding around the walls would have been a benefit.
I’ve got some modding to do. It would be better if I didn’t.
Overall, it’s not bad and I expect if there’s a V2.0, and if they heed my suggestions, it will be excellent.
T
Troy E.
Best Jerry (bar) Can!
This Mini bar is a great ice breaker, story teller, smuggler money can buy!
Well made easy to use!
J
Josh B.
Jerry Can Mini Bar for Fun
The Jerry Can Mini Bar is a fun and unique addition. It's well-designed and adds a party vibe to my Bronco.
Let customers speak for us
from 258 reviews
The bull bar was easy to install and made the Bronco look great
Installed on my factory capable steel bumpers and I couldn't be happier with how well it fit and matched the finish even though it was not intended to be on this model
AWESOME! I waited so long to get a hard top on my 2022 Bronco, and this one is great!
Top notch quality, excellent customer service (should out to Todd McNulty!), easy to install, and the new queit ride is top notch! Excellent product and value!
When I bought my Bronco I immediately bought a tire carrier "reinforcement" from a competitor. Over the past few months I've heard a creaking noise coming from the rear of the vehicle that's gotten progressively worse and louder, to where it sounded like an animal dying a miserable death. When I took the tire carrier off, It was actually curved from the weight. I've attached an edited picture to preserve the company's anonymity, perhaps you can figure it out :). The Turn Offroad carrier is ROCK SOLID. I lucked out and didn't have to do any of the adjustments on the hinges behind the passenger taillight. I also bought a flag carrier (not the HD) and didn't realize it wouldn't bolt directly to the accessory mounts. The product page didn't mention it would be needed, but I went back to order the MOLLE mount that will allow the flag carrier to be offset. Highly recommend this carrier, spend the money and do it right the first time!
I am finally happy that after almost 3yrs I have a hard to for my bronco. Todd at Turn Off Road was great to work with, he kept me informed about my order. Todd took my calls and answered all my questions. I very much recommend Turn Off Road to anyone that wants to get a hard to
Or anything from them.
Hardtop was well packaged and simple to install. Everything lined up well and quality is great. Kept informed of availability, and progress each step of the way. Love the look.
I installed the HD Tire Carrier Tailgate Reinforcement and Relocation Bracket to my 2021 Ford Bronco. I'm running 37x13.50 tires on a 20 inch wheel with negative 44 offset. The wheel + tire combo is 130 pounds. My tailgate rattled incessantly with every pot hole and man hole cover in town. I initially installed a reinforcement bracket from Rough Country that just wasn't sturdy enough to stop the rattle. i then installed the Turn Offroad Tailgate Reinforcement and the tailgate doesn't make a peep. I no longer drive in fear of my tire shearing off and spinning away to tire heaven. This thing is big and beefy. It is as-advertised. I installed it myself with a handful of tools (it took 5 hours including the relocation bracket installation and wiring modifications that come with the kit). I now aim for potholes, curbs and speed bumps just to see if I can get a creak out of the tailgate. So far so good.
Its pretty great. Beefy, tough, looks great. I bought the antenna mount and the jerry can holder to go with the tailgate reinforcement. These accessories do NOT play nice. You can use one or the other which was a bummer. Wasted $30. The online instructions/instructional videos leave out a few key details on both install and product use/interactions. Most of it is self-explanatory but you know what they say about assuming. The crew at TurnOR is only a phone call or email away and extremely helpful.
This bumper looks 100X better in person mounted to a Bronco than it does in photos. It sits high and tight and really complements the natural lines of the Bronco!
The Turn Offroad Jerry Can Mini Bar lets you take your favorite bar essentials virtually anywhere! Just like a Jerry Can that is designed to carry fuel this mini bar is made of rigid steel and is powder-coated for maximum durability.
The interior straps keep everything secure on the inside and a high-grade cam lock keeps everything locked up and safe from children or thirsty friends. The Jerry Can exterior is a standard NATO size so it will fit in any vehicle carrier designed for Jerry Cans.
This mini bar creates a rugged and fun way to store all of your bar essentials from home when on the go and is sure to be the center of attention at any campsite, party, or man cave!
Regular price
$149.99
Regular price
Sale price
$149.99
Sale
Unit price
/per
Availability
Sold out
In Stock
Adding product to your cart
JCMB-01 Key Features
Lock and key included keeping alcohol and drinkware secure
Textured black exterior powder coat resists scratching and marring
Interior straps are strategically positioned to best-fit drinkware and bottles
Standard Jerry Can size allows the minibar to fit into any vehicle jerry can mount
Applications
Anywhere there is a standard Jerry Can mount. In the house, out on the patio, man cave, bar, camping, picnic, or anywhere you want to put it/take it.
*Glasses, drinkware, alcohol, cigars, and other accessories pictured are not included.
Overall, it’s well built but could use some design and QC tweaks.
There are elastic strap holes without straps, limiting flexibility and utility.
The panel in the door was installed inverted (the larger, horizontal strap is on top, supposed to be on bottom, and it should have been design with two, parallel, large, horizontal, elastic straps to hold a flask more securely) but the 4 panel-mounting holes are not symmetrical, the panel can’t be corrected without drilling new holes.
Velcro straps would have been a better option.
Thin padding around the walls would have been a benefit.
I’ve got some modding to do. It would be better if I didn’t.
Overall, it’s not bad and I expect if there’s a V2.0, and if they heed my suggestions, it will be excellent.
T
Troy E.
Best Jerry (bar) Can!
This Mini bar is a great ice breaker, story teller, smuggler money can buy!
Well made easy to use!
J
Josh B.
Jerry Can Mini Bar for Fun
The Jerry Can Mini Bar is a fun and unique addition. It's well-designed and adds a party vibe to my Bronco.