Side MOLLE Panels for 2021+ Ford Bronco 4 - Door Hard Top - Turn Offroad

Side MOLLE Panels for Ford Bronco 4-Door OEM Hard Top

Name: Side MOLLE Panels for 2021-2026 Ford Bronco | Maximize Cargo Space
Brand: Turn Offroad
SKU: EA10-M4
Price: 649.99 USD
Availability: InStock
Rating: 4.6 (10 reviews)

2021–2026 Ford Bronco 4-Door with OEM Hard Top

Organize exterior gear on your OEM Bronco hard top with side MOLLE panels and quick-disconnect L-Track accessory support.

Key Features

Carry exterior gear more securely with side MOLLE panels made for the OEM Ford Bronco 4-Door hard top.
Install without drilling with a bolt-on design that uses factory mounting points.
Mount common accessories with a universal MOLLE grid and precision-cut RotopaX-ready patterns.
Adapt cargo quickly with a quick-disconnect L-Track system for tie-downs, hooks, brackets, and related accessories.
Keep roof rack options open with a roof-rack-compatible design and 90-pound static and 45-pound dynamic load ratings.

$649.99; $649.99
Unit price: per

In Stock - Ships Immediately

SKU: EA10-M4

Side MOLLE Panels for Ford Bronco 4-Door OEM Hard Top

$649.99

Liquid error (snippets/scoder-sticky-add-to-cart line 137): Could not find asset snippets/icon-cart.liquid

Side MOLLE Panels for Ford Bronco 4-Door OEM Hard Top

Detailed Description

Secure your exterior cargo setup for overland trips, trail tools, and daily utility with side MOLLE panels built for the OEM Ford Bronco 4-Door hard top. These panels mount to factory points without drilling and add a MOLLE grid, RotopaX-ready patterns, and a quick-disconnect L-Track system. They are sold as a pair and designed to work with most roof racks.

Organize exterior gear outside the cabin with MOLLE slots for pouches, tools, recovery gear, first aid kits, and related equipment.
Avoid hard top modifications with bolt-on installation using factory mounting points.
Add RotopaX storage with precision-cut mounting patterns built into the panels.
Change setups in seconds with quick-disconnect L-Track support for compatible anchors, hooks, brackets, and cargo accessories.
Maintain roof rack compatibility with a roof-rack-friendly design rated for 90 pounds static and 45 pounds dynamic.

These panels fit 2021–2026 Ford Bronco 4-Door models with the OEM hard top and are sold as a pair.

*Does not work with '26+ Painted tops*

Great panels

Love them!

Love love love them! Assembly wasn't too difficult. Took me about an hour to unbox and install with help of someone to lift the roof about an inch. Also, If you're installing with the roof rack, install these first. Thanks again! Love them!

Socket screws

Product replaced regular/pan head screws seen in the installation video with socket screws that don’t accommodate your own full-size roof rack. Had to drill holes to accommodate 5 gallon Rotopax jerry can.

Highly recommend

Crazy high quality product, Super easy install…

Side Molle panels for Bronco

First off I gave it 4 stars for two reasons: First is no instructions and when it said online for them I expected a PDF or something not a video that does a half @ss job of showing the install. It can be figured out without any help from video or instructions but it significantly adds time to the install. There is really only one right way for parts to fit. The short L-track bar goes on the bottom. I put the long one first and had to take it off which adds time and brings me to the 2nd reason for 4 stars. Everything looks and feels high quality EXCEPT the screws for the L-track system. These screws are not anodized black, they are silver screws very shoddily painted black. The paint is so thick on some of them that the Allen wrench cannot seat completely making it hard to get them tightened and harder to remove. Also as soon as you get the Allen wrench in the paint flakes off revealing the silver underneath.
Now that the bad is over with onto the good. This was very well packaged and nothing was damaged upon arrival. It looks good and not including the vehicle prep took about an hour to install due to having to figure it out myself. It can be put on with one person although a bit tricky. Just make sure the back cap is loose by lifting it from the inside then you can reach in from the outside via the passenger door area and lift it high enough to get the bottom mount in place. once you set that side of the cap down it locks it in so you can get back inside to make sure the bolt holes are lined up. Repeat for other side. I have a 25' Outer banks with the black painted top so I can confirm this fits with the painted top. For the top mount to get it lined up properly and fit in the seam above the window and between the roof you might have to give it a little love tap with the heel of your hand.
I will be putting a full length Attica Terra series rack on with this because unfortunately I cannot remove the front panels with the matching Turn off road full rack and the half rack (more like 1/3rd rack) is too short to fit my needs.

Wow. Very well made. The attention to detail with the wrapping and packaging was impressive. Great team at Turn Off-road. Would like to see them to start including a PDF or printed instructions as well. I see others have mentioned, but I figured everything out easily. Will definitely get more of their products.

External MOLLE Side Panels were a great addition!

Turn Off-Road's External MOLLE Side Panels expand vehicle storage, ideal for off-roaders to organize gear. Installation is mostly straightforward with clear instructions, though minor issues arose with video clarity and screw access during Roto Pax mount setup. Once installed, the durable panels seamlessly integrate, offering modular storage with precise MOLLE webbing. Despite minor installation quirks, these panels are a recommended upgrade for external storage and organization.

OEM top side molle panels for bronco

I like the panels but thought the videos were unclear on making sure you have the right side in plane and the shape of panel on video is different. I have the Turn Off-road half rack on the back and so the install process was different. The biggest issue is the cap head top screws that came with the panels interfere with the half ra k where the connector at the top. They don’t sit right. I might try button top screws to see it if that helps.

Strong and easy enough to install.

Use the youtube video to install. Didn’t come with instructions. Needed 2nd person to help lift rear part of hardtop a couple inches and get it aligned, but other than that it was super easy to install. Feels super sturdy and looks great. Mounted recovery boards and took it out on blue OnX trails and shook the hell out of the truck. Didn’t hear the rack on the highway, nothing budged off road. Really glad I didn’t skimp and buy the cheaper Amazon ones.

External Side Molle Panels

Great quality product, the items come well packaged however there was no included directions for assembly but they are/were very easy to figure out. Time to assemble and install was about an hour moving at a slow pace and removing the top. Adds a great storage addition to the outside of the Bronco, I am looking forward to future items available using the track system. I would definitely highly recommend this item if you are looking for additional storage options.