Overall, it’s well built but could use some design and QC tweaks.
There are elastic strap holes without straps, limiting flexibility and utility.
The panel in the door was installed inverted (the larger, horizontal strap is on top, supposed to be on bottom, and it should have been design with two, parallel, large, horizontal, elastic straps to hold a flask more securely) but the 4 panel-mounting holes are not symmetrical, the panel can’t be corrected without drilling new holes.
Velcro straps would have been a better option.
Thin padding around the walls would have been a benefit.
I’ve got some modding to do. It would be better if I didn’t.
Overall, it’s not bad and I expect if there’s a V2.0, and if they heed my suggestions, it will be excellent.
T
Troy E.
Best Jerry (bar) Can!
This Mini bar is a great ice breaker, story teller, smuggler money can buy!
Well made easy to use!
J
Josh B.
Jerry Can Mini Bar for Fun
The Jerry Can Mini Bar is a fun and unique addition. It's well-designed and adds a party vibe to my Bronco.
Let customers speak for us
from 319 reviews
Two-door bronco half a roof rack
Fairly easy to install I’m very impressed with the shipping, packaging and quality of product. Would recommend.
It’s a great looking bumper with a great price. Install was super easy except for the parking sensors. I couldn’t line it up correctly and ended up just turning off my rear parking sensors. With the camera, it’s not like I truly need it. I’m sure if I had a dremel and wasn’t lazy I could’ve made the sensors line up correctly.
The roof rack was simple to put together, however installing it took a min to get the rack centered. Once the rack was centered it was a breeze. I love the half rack but may end up buying the full one, the front section of the roof seem like it is missing something due to being a half rack.
This is for the OEM modular bumper Baja bull bar. I temporarily installed this at first in a somewhat haphazard way screwing in the original long torx head bolts, but not the smaller supplied bolts, because I wasn’t sure if the supplied washers were stainless. A couple of the bolts had a hard time going in because the bull bar didn’t quite align with the holes. I wasn’t happy at this point. But after buying metric stainless washers and painting them black I reinstalled the bumper. This time I started with all the four shorter supplied bolts and once they were started, I did the rest of the bolts, leaving the two front face bolts for last. This fit much better and now I am fully happy with the bar. I am also happy with the design, and also it’s one of the most reasonably priced bars like this I could find. The quality of the welds and the paint is very good too. There was a tiny spot that I had to touch up with some black paint, but nothing meaningful. The one suggested change I would make to the company Is that where the bar attaches to the front face of the bumper, use a larger piece of metal on each side so that the bar can screw into four holes on the front face of the bumper, not just two holes as it’s designed presently. This would make for a stronger attachment.
The upper control arm is not only gorgeous to look at. It has created an even better driving experience the quality it adds to bumpier trails has me never questioning the decision I made with purchasing them over all the other options.
I changed from the soft top to the Turn Hardtop. night and day difference! the fit and finish is exceptional and I have gotten several compliments on it since installation. Thanks Turn!!!
Install took about 2 hours by myself. They are heavy so a jack and jack stands are recommended. I used hand tools so it would have probably gone faster with impacts, but some of the bolts are in tight locations. I had to drill out the front 2 pinch weld holes as they did not line up all the way, but that was no big deal. The top plates were also installed backwards on mine, but 5 minutes later and all was well. Fit and finish is fantastic. Packaging was great, each part was wrapped individually in a rubbery type material, then wrapped in plastic and sprayed with foam to fill out the box. FedEx label said 149.8 pounds and delivery guy about had a Hernia carrying it to my door. Overall very satisfied customer. They look great and work even better.
I received this within 24 hours of ordering it, which is just flat out amazing even though I'm fairly close by Turn HQ. The solution was well packaged, and the Youtube based instructions were pretty easy for me to follow. I was able to install this by myself with relative easy in about 90 minutes. I hardly had to make any adjustments and now my tailgate is clearly strong enough to support more weight on top of the spare.
The Turn Offroad Jerry Can Mini Bar lets you take your favorite bar essentials virtually anywhere! Just like a Jerry Can that is designed to carry fuel this mini bar is made of rigid steel and is powder-coated for maximum durability.
The interior straps keep everything secure on the inside and a high-grade cam lock keeps everything locked up and safe from children or thirsty friends. The Jerry Can exterior is a standard NATO size so it will fit in any vehicle carrier designed for Jerry Cans.
This mini bar creates a rugged and fun way to store all of your bar essentials from home when on the go and is sure to be the center of attention at any campsite, party, or man cave!
Regular price
$149.99
Regular price
Sale price
$149.99
Sale
Unit price
/per
Availability
Sold out
In Stock
Adding product to your cart
JCMB-01 Key Features
Lock and key included keeping alcohol and drinkware secure
Textured black exterior powder coat resists scratching and marring
Interior straps are strategically positioned to best-fit drinkware and bottles
Standard Jerry Can size allows the minibar to fit into any vehicle jerry can mount
Applications
Anywhere there is a standard Jerry Can mount. In the house, out on the patio, man cave, bar, camping, picnic, or anywhere you want to put it/take it.
*Glasses, drinkware, alcohol, cigars, and other accessories pictured are not included.
Overall, it’s well built but could use some design and QC tweaks.
There are elastic strap holes without straps, limiting flexibility and utility.
The panel in the door was installed inverted (the larger, horizontal strap is on top, supposed to be on bottom, and it should have been design with two, parallel, large, horizontal, elastic straps to hold a flask more securely) but the 4 panel-mounting holes are not symmetrical, the panel can’t be corrected without drilling new holes.
Velcro straps would have been a better option.
Thin padding around the walls would have been a benefit.
I’ve got some modding to do. It would be better if I didn’t.
Overall, it’s not bad and I expect if there’s a V2.0, and if they heed my suggestions, it will be excellent.
T
Troy E.
Best Jerry (bar) Can!
This Mini bar is a great ice breaker, story teller, smuggler money can buy!
Well made easy to use!
J
Josh B.
Jerry Can Mini Bar for Fun
The Jerry Can Mini Bar is a fun and unique addition. It's well-designed and adds a party vibe to my Bronco.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Select a purchase option to pre order this product