Summary

CrawlReady is our badge for bumpers, sliders, and tire carriers designed to take real trail abuse. These parts are built with high-clearance geometry, reinforced mounting, trail-proven materials, and the protection needed for serious off-road use. We regularly test them in places like Johnson Valley, Moab, the Rubicon, and other harsh terrain to make sure they hold up where it actually matters.

Key Features

• High-clearance designs for improved approach, departure, and breakover angles
• Reinforced mounting points and trail-focused construction
• Built from durable materials, including 3–5 mm steel plate where applicable
• Designed around real recovery, protection, and tire clearance needs
• Tested regularly on rocks, ledges, desert trails, and technical terrain

Customer Benefits

CrawlReady means you are getting a part that was designed to be used, not just looked at. Whether it is a bumper, slider, or tire carrier, the goal is simple: bolt it on, hit the trail, and trust that it is ready for the kind of abuse real off-roaders put their rigs through.

Care Note

Optional lorem ipsum dolor site amet.

Summary

DrySeal is our badge for hard tops engineered to seal out the elements. Built by our designer who has over 40 years of experience using proven sealing principles developed through decades of real-world fiberglass and automotive top manufacturing. Each top uses automotive-style bulb seals, molded seal channels, compression latches, drain channels, overlapping panels, and carefully designed weatherstripping to create a secure, weather-tight seal around the roof, Targa panel, side glass, rear window, liftgate, and door surrounds. The design is water-tested during development and validation, then every production top is built consistently to that same proven standard. The result is a hard top designed to stay dry through real weather, trail use, and daily driving.

Key Features

• 40+ years of hard top manufacturing experience
• Automotive-style bulb seals and weatherstripping
• Molded seal channels and controlled drain paths
• Compression latches for secure panel engagement
• Overlapping panel design to help direct water away from openings
• Designed to seal around the Targa panel, glass, liftgate, roof seams, and door surrounds
• Water-tested during product development and built to the same validated design

Customer Benefits

DrySeal means your hard top is built to protect the interior, not just cover it. It helps address common frustrations with soft tops, poorly sealed aftermarket tops, wind-driven rain, and water intrusion caused by weak seal design. With proper installation, clean seals, and correct latch alignment, DrySeal gives you confidence that your Bronco or Jeep is ready for real weather.

Summary

HyperLyte is our badge for bumpers designed to give you real protection and trail-ready clearance without hanging excessive weight off the front or rear of your rig. Instead of simply overbuilding every surface, HyperLyte bumpers use thinner steel in key areas, a more efficient structure, reinforced geometry, compact fitment, and a high-clearance profile to reduce weight while keeping strength where it matters. Compared to many traditional steel bumpers, HyperLyte designs can weigh roughly half as much. The goal is not to build a bumper that absorbs every hit like a boat anchor. The goal is to stay high, tight, and out of the rocks in the first place.

Key Features

• Lightweight steel construction
• Thinner steel used strategically in key areas
• Reinforced structure where strength is needed most
• Compact, high-clearance profile
• Designed to reduce unnecessary front-end or rear-end weight
• Helps limit suspension sag, handling loss, MPG impact, and added strain
• Approximately half the weight of many traditional steel bumper designs

Customer Benefits

HyperLyte gives you a smarter way to build your rig. You get the clean look, clearance, and usable protection of a steel bumper without the excessive weight that can make a vehicle feel sluggish, nose-heavy, or overbuilt. It is designed for drivers who want real off-road function and better daily drivability in the same package.

Summary

QuietCore is our badge for hard tops engineered to reduce cabin noise and improve everyday comfort. Turn Offroad hard tops use a multi-layer fiberglass shell, insulated internal core, acoustic non-woven liner, and thousands of tiny resin-encapsulated air pockets that help absorb and disrupt sound before it reaches the cabin. The result is a more refined driving experience, especially compared to the noise, flap, and harshness of a factory soft top. QuietCore is focused first on reducing sound, but the same insulated construction also helps reduce heat and cold transfer for a more comfortable interior in changing weather.

Key Features

• Multi-layer fiberglass hard top construction
• Insulated internal core with thousands of resin-encapsulated air pockets
• Acoustic non-woven interior liner
• Helps reduce wind noise, road noise, rain noise, hollow echo, and cabin drone
• Also helps improve temperature insulation
• Designed to make the cabin feel quieter, more solid, and more finished
• Tested to be 15% quieter on average

Customer Benefits

QuietCore helps turn your Bronco or Jeep into a more comfortable daily driver and long-distance trail rig. You get the open-air freedom when you want it, with a hard top that feels more solid, quieter, and better insulated than a basic soft top or hollow fiberglass shell.

Summary

SunGuard is our badge for hard tops finished with Turn Offroad’s UV-stable black textured gelcoat. This sprayed-on gelcoat finish is designed to stay black, resist fading, and hold up against years of sun exposure, weather, and daily use. Unlike finishes that quickly turn dull or chalky, SunGuard helps your hard top maintain a tough, clean, factory-style appearance over time. It is built for customers who want their hard top to look right not just on install day, but years down the road.

Key Features

• UV-stable black textured gelcoat finish
• Sprayed-on protective surface
• Designed to resist fading, dullness, chalking, and discoloration
• Tough finish built for sun exposure, weather, and daily driving
• Applies to all Turn Offroad hard tops with black gelcoat
• Compatible with Turn Offroad protectant to restore and maintain a deep black finish

Customer Benefits

SunGuard gives you confidence that your hard top is built to keep looking good long after it is installed. With a UV-stable gelcoat and simple finish care using Turn Offroad protectant, your top is designed to stay black, clean, and ready for years of real-world use.

Summary

TriGuard is our badge for Turn Offroad powdercoated products that go through a three-stage coating process for added durability, corrosion resistance, and long-term appearance. Each TriGuard product is sandblasted for proper surface preparation, treated with an electrolysis coating layer, then finished with a fine-texture powdercoat. This layered process is designed to help protect against rust, corrosion, chips, trail rash, road salt, UV exposure, and everyday wear. Whether it is a bumper, slider, tire carrier, bracket, armor piece, or mount, TriGuard helps the finish hold up to real use.

Key Features

• Three-stage coating process
• Sandblasted surface preparation
• Electrolysis coating layer for added corrosion protection
• Fine-texture powdercoat finish
• Designed to resist rust, corrosion, chips, UV exposure, road salt, and general wear
• Applies to all Turn Offroad powdercoated products

Customer Benefits

TriGuard gives you confidence that your coating is built to last. It helps your parts stay protected, clean-looking, and ready for harsh weather, daily driving, and off-road abuse.

Care Note

Powdercoat is tough, but deep rock strikes or scratches that expose bare steel should still be touched up to help prevent rust over time.